PIONEER COVERALL, a WASTEQUIP COMPANY

Route 20  North Oxford, MA  01537

UNIT SPECIFICATIONS

MODEL BL7000

BOX LOCKS    Patent Pending

A complete Box Locking system has two (2) lock assemblies, each with two (2) locking hooks. The complete system will also include two (2) striker assemblies, each with two (2) spring-loaded spring plates. One each, striker assembly, and lock assembly per side of vehicle. The locking and unlocking mechanism relies solely on the power and motion of the hoist, no additional power source is required. The locking action is purely mechanical, and unlocking is power assisted, via the hoist motion in concert with Pioneers’ patent pending striker configuration.

LOCK ASSEMBLY

Two (2) precision cut, 1” thick, steel locking hooks, with built in over-travel stops.
One (1) 7/8” diameter, cold drawn steel axel, with quick disconnect lynch pins, that allow for easy field disassembly from either end.
Three (3) steel spacer tubes to maintain correct hook location.
One (1) 1/2" thick, hot rolled steel, formed and welded housing, with integral lock hook stop.

STRIKER ASSEMBLY

One (1) 1/2" thick hot rolled steel mounting plate, to facilitate chassis or sub frame mounting.
Two (2) 1/2" thick, hot rolled steel fabricated spring plates, to ensure independent locking, while safeguarding against damage from obstructed hook movement.
Two (2) steel coiled springs.
One (1) 7/8” diameter, cold drawn steel axel, with quick disconnect lynch pins, that allow for easy field disassembly from either end.